Başlık için İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 127, listelenen: 47-66
-
Evaluation of seismic site classification for Kahramanmaras City, Turkey
(SPRINGERONE NEW YORK PLAZA, SUITE 4600 , NEW YORK, NY 10004, UNITED STATES, 2021)This paper presents a study on the seismic site classification map using the geophysical tests in Kahramanmaras city located at a place where African, Anatolian, and Arabian plates meeting in southern-central Turkey. ... -
Experimental and numerical investigation of hyper-elastic submerged structures strengthened with cable under seismic excitations
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2020)This study presents dynamic responses of submerged highly elastic structures, strengthened with cable elements and the fluid interacting with the structure. For this purpose, fluid and structure are modelled with smoothed ... -
Experimental Investigation of Soil Disturbance Effect on Bearing Capacity of Organic Soil
(SPRINGER, 2024)The model test investigations on the soft soils are usually carried out on samples prepared in the laboratory and assuming site conditions. However, such soils that are prepared in the laboratory only partially reflect ... -
Experimental Investigation on the Bonding Strength of Knotted CFRP Bars in Bulk Plastics
(MDPI, 2023)Improving the interfacial bonding strength of CFRP materials is crucial for enabling the development of novel composite beam structures with higher specific bending strength demanded by the composite industry. In this ... -
Experimental studies on the physico-mechanical properties of jet-grout columns in sandy and silty soils
(PERGAMON-ELSEVIER SCIENCE LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2016)The term of ground improvement states to the modification of the engineering properties of soils. Jet grouting is one of the grouting methods among various ground improvement techniques. During jet grouting, different ... -
Exploring flood and erosion risk indices for optimal solar PV site selection and assessing the influence of topographic resolution
(PERGAMON-ELSEVIER SCIENCE LTD, 2023)This study explores the suitability of Mentes,e Region in Turkiye for the installation of solar PV farms, given the significant increase in energy demand in the country and the need to reduce reliance on fossil fuels. The ... -
Fabrication of Gd2O3/PSF Membranes via Aqueous Phase Inversion Method
(HİTİT ÜNİVERSİTESİ, 2022)The purpose of this study was to look into the effect of Gadolinium oxide (Gd2O3) concentration (0.5%, 1%, and 2%) on the performance of newly developed Gd2 O3 /PSF membranes A common phase inversion method was used to ... -
Fresh, Mechanical, Transport, and Durability Properties of Self-Consolidating Rubberized Concrete
(AMER CONCRETE INST, 2012)This paper presents the fresh, mechanical, transport, and durability performances of self-consolidating rubberized concretes (SCRCs). Fresh concrete properties were determined with slump flow, V-funnel, J-ring, and L-box ... -
Green building envelope designs in different climate and seismic zones: Multi-objective ANN-based genetic algorithm
(ELSEVIER, 2022)In recent years, the major component of green building designs adopted by governments in order to reduce CO2 emissions as well as energy consumption is the green building envelope. The green envelope has the most important ... -
A holistic sustainability assessment of a university campus using life cycle approach
(Institute for Ionics, 2023)The sustainability performances of campuses are of importance as it could model the efective sustainable initiatives that could be then applied to campuses by decision-makers and designers. Studies have been conducted on ... -
Hydro-elastic analysis of standing submerged structures under seismic excitations with SPH-FEM approach
(LATIN AMER J SOLIDS STRUCTURES, UNIV SAO PAULO, GROUP SOLID MECHANICS & STRUCTURAL IMPACT, SAO PAULO, 05508-900, BRAZIL, 2020)In this paper, a fully coupled fluid structure interaction (FSI) method is used to investigate the hydro-elastic response of a fully submerged standing structure under seismic excitations. Two different domains (solid and ... -
Image Processing and Cell Phone Microscopy to Analyze the Immunomagnetic Beads on Micro-Contact Printed Gratings
(MDPI AG, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2016)In this paper we report an ultra-low-cost spherical ball lens based cell phone microscopy and image processing algorithms to analyze the amount of immunomagnetic beads on micro-contact printed gratings. The spherical ball ... -
Impact of Jet-Grouting Pressure on the Strength and Deformation Characteristics of Sandy and Clayey Soils in the Compression Zone
(KOREAN SOCIETY OF CIVIL ENGINEERS-KSCE, 3-16 JUNGDAE-RO 25-GIL, SONGPA-GU, SEOUL, 05661, SOUTH KOREA, 2019)Jet-grouting as a soil improvement method is extensively preferred in today's civil engineering practice. High-modulus grout columns constructed by extremely high jetting pressures displace the surrounding soil causing a ... -
The impact of organic cotton use and consumer habits in the sustainability of jean production using the LCA approach
(SPRINGER, 2023)Due to the rise in clothing consumption per person and growing consumer awareness of environmental issues with products, the textile industry must adopt new practices for improving sustainability. The current study ... -
Improvement of an Undisturbed Peat Soil with Jet Grout Columns: Physical and Numerical Modeling
(Institute for Ionics, 2023)The bearing capacity of the composite-formed soil, such as grouted peat soil, is a crucial design parameter that can be improved by employing jet grout columns (JGCs). The coupling effect of the requirement of new industrial ... -
Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions
(ELSEVIER SCI LTD, 2013)This paper presents the influence of shrinkage-reducing (SHR) and superplasticizing and set-retarding admixtures (SSRe) on the properties of slag pastes and mortars activated by liquid sodium silicate with different ... -
Influence of nano SiO2 and nano CaCO3 particles on strength, workability, and microstructural properties of fly ash-based geopolymer
(ERNST & SOHN, ROTHERSTRASSE 21, BERLIN, DEUTSCHLAND 10245, GERMANY, 2020)The influence of nano SiO2(NS) and CaCO3(NC) particles on the properties of class F fly ash based geopolymer mortar activated with different sodium ion concentrations have been investigated. Mortar mixture proportions were ... -
The infuence of cement kiln dust on strength and durability properties of cement‑based systems
(SPRINGER HEIDELBERG, 2022)There are very few studies in the literature on the usage of CKD in cementitious systems. This article presents the laboratory study results on the infuence of cement kiln dust (CKD) on the properties of mortar made with ... -
An integrated life cycle assessment approach for denim fabric production using recycled cotton fibers and combined heat and power plant
(ELSEVIER SCI LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2021)Due to the increase in consumption and awareness of environmental impacts, switching to new business models has become mandatory in the textile industry. The aim of this study is to investigate the contribution of using ... -
Integration of direct microfiltration and reverse osmosis process for resource recovery from municipal wastewater
(DESALINATION PUBL, 2023)For the sustainability of water resources, the recovery of water, organic matter (OM), energy, and nutrients from municipal wastewater become very attractive resources. As direct application of water, nutrient, and energy ...
