• Computational Fluid Dynamics (CFD) Analysis of Bioprinting 

  Fareez, Umar Naseef Mohamed; Naqvi, Syed Ali Arsal; Mahmud, Makame; Temirel, Mikail (John Wiley and Sons Inc, 2024)

  Regenerative medicine has evolved with the rise of tissue engineering due to advancements in healthcare and technology. In recent years, bioprinting has been an upcoming approach to traditional tissue engineering practices, ...

• Hydrogen susceptibility of Al 5083 under ultra-high strain rate ballistic loading 

  Baltacioglu, Mehmet Furkan; Mozafari, Farzin; Aydin, Murat; Cetin, Baris; Oktan, Aynur Didem; Teoman, Atanur; Li, Yang; Bal, Burak (Walter de Gruyter GmbH, 2024)

  The effect of hydrogen on the ballistic performance of aluminum (Al) 5083H131 was examined both experimentally and numerically in this study. Ballistics tests were conducted at a 30° obliquity in accordance with the ballistic ...

• A phenomenological hydrogen induced edge dislocation mobility law for bcc Fe obtained by molecular dynamics 

  Baltacioglu, Mehmet Furkan; Kapci, Mehmet Fazil; Schön, J. Christian; Marian, Jaime; Bal, Burak (ELSEVIER, 2024)

  Investigating the interaction between hydrogen and dislocations is essential for understanding the origin of hydrogen-related fractures, specifically hydrogen embrittlement (HE). This study investigates the effect of ...

• Experimental and statistical damage analysis in milling of S2-glass fiber/epoxy and basalt fiber/epoxy composites 

  Sayin, Ahmed Cagri; Danisman, Sengul; Ersoy, Emin; Yilmaz, Cagatay; Kesriklioglu, Sinan (John Wiley and Sons Inc, 2024)

  S2-glass fiber reinforced plastics (S2-GFRP) and basalt fiber reinforced plastics (BFRP) have emerged as crucial materials due to their exceptional mechanical properties, and milling of composite materials plays an important ...

• Design analysis of a wave energy converter for hydrogen generation near shoreline of Black Sea 

  Bekçi, Eyüp; Koca, Kemal; Bashir, Muhammad Farhan (Institution of Chemical Engineers, 2024)

  The generation of electricity from waves has attracted a lot of attention from researchers lately. Despite the vastness and accessibility of wave energy across the majority of the planet, there is a dearth of literature ...

• Compensating energy demand of public transport and yielding green hydrogen with floating photovoltaic power plant 

  Koca, Kemal (Institution of Chemical Engineers, 2024)

  The last three decades have seen a dramatic increase in the renewable energy sector as a result of increased human energy consumption and environmental concerns about fossil fuels. Offshore renewable energy sources are the ...

• Edge dislocation depinning from hydrogen atmosphere in α-iron 

  Kapci, Mehmet Fazil; Yu, Ping; Liu, Guisen; Shen, Yao; Li, Yang; Bal, Burak; Marian,Jaime (Acta Materialia Inc, 2024)

  Understanding the dislocation motion in hydrogen atmosphere is essential for revealing the hydrogen-related degradation in metallic materials. Atomic simulations were adopted to investigate the interaction between dislocations ...

• Role of Partial Flexibility on Flow Evolution and Aerodynamic Power Efficiency over a Turbine Blade Airfoil 

  Koca, Kemal; Genç, Mustafa Serdar (MDPI, 2024)

  In this study, the aerodynamic performance of a cambered wind turbine airfoil with a partially flexible membrane material on its suction surface was examined experimentally across various angles of attack and Reynolds ...

• Comparative study on bending behavior and damage analysis of 3D-printed sandwich core designs with bio-inspired reinforcements 

  Atahan, M. Gokhan; Erikli, Merve; Ozipek, Enes; Ozgun, Fulya (ELSEVIER, 2024)

  In this study, novel sandwich core designs with bio-inspired reinforcements were proposed and their bending behaviors were comparatively examined. The geometrical shapes of alligator osteoderm and chambered nautilus shell ...

• Indirect internal reforming SOFC accommodating graded-catalytic domain fabricated by paper-structured catalyst 

  Aydin, Özgür; Matsumoto, Go; Kubota, Atsushi; Tran, Dang Long; Sakamoto, Mio; Shiratori, Yusuke (Electrochemical Society Inc., 2019)

  Biogas can be directly utilized in Solid Oxide Fuel Cells (SOFCs), as it can be reformed to H2-rich mixture in the anode of SOFCs. However, the rate of reforming reaction significantly changes along the flow field due to ...

• INVESTIGATION OF TEMPERATURE AND PRESSURE EFFECT ON THE HYDROGEN SORPTION KINETICS IN THE INTERFACE OF Mg/MgH2 BY MOLECULAR DYNAMICS 

  Kapçı, Mehmet Fazıl; Wu, Zhen; Bal, Burak (International Association for Hydrogen Energy, IAHE, 2022)

  Molecular dynamics simulations were performed in order to analyze the hydrogen sorption kinetics between αMgH2 and hcp Mg structures under different temperatures and pressures. Results showed that hydrogen desorption from ...

• The Digitized Shoulder: From Preoperative Planning to Patient-Specific Guides 

  Sadeghi, Majid Mohammad; Kapicioglu, Mehmet; Kececi, Emin Faruk; Bilsel, Kerem (SPRINGER LINK, 2022)

  As the information and computer technologies improve, it can change how the shoulder surgeries and treatments are done. Digitalization of the shoulder joint acquired via MR and CT (1) shows the surgeons the pathology in a ...

• Accurate Prediction of Residual Stresses in Machining of Inconel 718 Alloy through Crystal Plasticity Modelling 

  Kesriklioglu, Sinan; Kapci, Mehmet Fazil; Büyükçapar,Rıdvan; Çetin , Barış; Yılmaz, Okan Deniz; Bal, Burak (Afyon Kocatepe Üniversitesi, 2023)

  Determination and assessment of residual stresses are crucial to prevent the failure of the components used in defense, aerospace and automotive industries. The objective of this study is to present a material method to ...

• GIS-AHP APPROACH FOR A COMPREHENSIVE FRAMEWORK TO DETERMINE THE SUITABLE REGIONS FOR GEOTHERMAL POWER PLANTS IN IZMIR, TÜRKİYE 

  Koca, Kemal; Karipoğlu, Fatih; Öztürk, Emel Zeray (Konya Mühendislik, 2024)

  Geothermal energy is gaining more reputation and importance around the world. Correspondingly, suitable location selection is a critical step and has become necessary for the successful installation and operation of ...

• Flow properties of an Ahmed Body with different passive flow control methods 

  Koca, Kemal; Özden, Mustafa (Gazi Üniversitesi, 2024)

  A numerical simulation by utilizing the FloEFD software was carried out in order to investigate the flow topology formed on slant surface and wake region of an Ahmed Body with and without passive flow control techniques. ...

• Jet interactions in a feedback- free fluidic oscillator at low flow rate 

  Tomac, Mehmet Nazım; Gregory, James W. (American Institute of Aeronautics and Astronautics Inc., 2013)

  In this work, the internal fluid dynamics and frequency characteristics of feedback-free fluidic oscillators are investigated experimentally for low flow rates below 3.4 mL/s. The internal flow field of feedback-free fluidic ...

• A review of fluidic oscillator development and application for flow control 

  Gregory, James W.; Tomac, Mehmet Nazım (2013)

  This review provides a detailed discussion of the historical development of fluidic oscillators and their application to flow control. Fluidic oscillators were initially developed in the 1960's for a variety of applications, ...

• Development of a Nanoparticle-Embedded Chitosan Sponge for Topical and Local Administration of Chemotherapeutic Agents 

  Goldberg, Manijeh; Manzi, Aaron; Aydin, Erkin; Singh, Gurtej; Khoshkenar, Payam; Birdi, Amritpreet; LaPorte, Brandon; Krauskopf, Alejandro; Powell, Geralle; Chen, Julie; Langer, Robert (American Society of Mechanical Engineers (ASME), 2014)

  The following work describes the development of a novel noninvasive transmucosal drug delivery system, the chitosan sponge matrix (CSM). It is composed of cationic chitosan (CS) nanoparticles (NPs) that encapsulate cisplatin ...

• Localization of an autonomous personnel carrying vehicle in indoor environments 

  Altuǧ, Erdinç; Gelbal, Şükrü Yaren; Keçeci, Emin Faruk; Gültekin, Mehmet Kabil (Association for Computing Machinery, 2017)

  There is an emerging need of intelligent vehicles on indoor environments such as university campuses, airports or shopping malls. These intelligent vehicles can help elderly, disabled, or people with heavy luggage. This ...

• The influence of plastic deformation mechanisms on the adhesion behavior and collagen formation in osteoblast cells 

  Uzer-Yilmaz, Benay; Monte F.; Awad, Kamal R.; Aswath, Pranesh B.; Varanasi, Venu G.; Canadinç D. (SPRINGER, 2018)

  In many of biomedical applications, the implant might get in direct contact with the bone tissue where the osteogenesis needs to be stimulated. If osteoblasts can not successfully attach on the implant surface, the bone ...

Daha Fazla