Bölüm "AGÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümü" Scopus İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 85, listelenen: 1-20
-
Assessment of biocompatibility of novel TiTaHf-based high entropy alloys for utility in orthopedic implants
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)This paper presents the findings of experimentally observed corrosion response of novel TiTaHf-based high entropy alloys (HEAs) in fetal bovine serum (FBS) to evaluate their biocompatibility in presence of proteins and ... -
An atomistic study on the HELP mechanism of hydrogen embrittlement in pure metal Fe
(PERGAMON-ELSEVIER SCIENCE LTD, 2024)The Hydrogen Enhanced Localized Plasticity (HELP) mechanism is one of the most important theories explaining Hydrogen Embrittlement in metallic materials. While much research has focused on hydrogen's impact on dislocation ... -
Characterization of 3D fabric permeability with skew terms
(ELSEVIER SCI LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2017)Flow simulations can predict resin flow behavior and void formation locations in a preform. One important parameter for simulation is the preform permeability. For thick parts with distribution media on the surface, resin ... -
A comprehensive experimental and modeling study of the strain rate- and temperature-dependent deformation behavior of bio-degradable Mg-CeO2 nanocomposites
(ELSEVIER, 2024)A comprehensive study was undertaken on the temperature-dependent and strain rate-sensitive deformation behavior of near-dense low-volume fraction magnesium-cerium dioxide (Mg-CeO2 ) nanocomposites synthesized by powder ... -
Computational fluid dynamics for the optimization of internal bioprinting parameters and mixing conditions
(WHIOCE PUBL PTE LTD, 2023)Tissue engineering requires the fabrication of three- dimensional (3D) multimaterial structures in complex geometries mimicking the hierarchical structure of biological tissues. To increase the mechanical and biological ... -
Convenient Site Selection of a Floating PV Power Plant in Türkiye by using GIS-Fuzzy Analytical Hierarchy Process
(SPRINGER, 2024)Floating photovoltaics (FPVs) are appearing as a promising and an alternative renewable energy opinion in which PV panels are mounted on foating platforms in order to produce electricity from renewable energy on water ... -
Corrosion behavior of novel Titanium-based high entropy alloys designed for medical implants
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2020)This paper reports on the corrosion behavior of three TiTaHf-based high entropy alloys (HEAs) in simulated body fluid (SBF) and artificial saliva (AS) in order to assess their potential utility as implant materials. ... -
Deformation behavior of nanostructured aluminum: Experiment and computational study
(Elsevier Ltd, 2023)Nanocrystalline metals have been processed from powder predecessors in recent times in significant ways, and nowadays, materials are starting to be manufactured which are not only strong but also ductile. Nanocrystalline ... -
A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effects of hydrogen and temperature on impact response and corresponding microstructure of aluminum (Al) 7075 alloy were investigated under medium strain rate impact loading. The specimens were subjected to impact energy ... -
Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247
(SPIE-SOC PHOTO-OPTICAL INSTRUMENTATION ENGINEERS1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98225, 2021)Surface inspections are important in steelmaking processes to characterize the final product's quality. We present a method to measure surface depth profile using laser scattering geometry. This technique is used to analyze ... -
Development of high-performance nanostructured aluminum and its constitutive modeling
(Taylor and Francis Ltd., 2023)A new technique, an in-situ hot-extrusion-based synthesizing process, is proposed to develop high-performance nanocrystalline aluminum (nc-Al) with an optimally tuned strength-to-ductility ratio suitable for various ... -
The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading
(ELSEVIER SCI LTD, 2022)Composites are well-known and widely used materials due to their anisotropic nature and high strength-to-weight ratio; therefore, the mechanical performance of these materials is crucial. Precise tensile testing is essential ... -
Effect of Geometry Modifications on the Vectoring Performance of a Controlled Jet
(ISFAHAN UNIV TECHNOLOGY, MECHANICAL ENGINEEING DEPT, JAFM OFFICE, ISFAHAN, 84156-83111, IRAN, 2017)Jet vectoring performances of ten different designs with various depths and geometrical outlines were quantified through constant temperature anemometry measurements for a Reynolds number range from 10,000 to 30,000 by ... -
Effect of hydrogen on fracture locus of Fe-16Mn-0.6C-2.15Al TWIP steel
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effect of hydrogen on the mechanical response and fracture locus of commercial TWIP steel was investigated comprehensively by tensile testing TWIP steel samples at room temperature and quasi-static regime. 5 different ... -
Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The aim of this research was to investigate the effect of pre-rolling temperature on the interfacial properties in delamination modes 1 and 2; and formability in Single Point Incremental Forming (SPIF) of Steel-Steel (St-St) ... -
Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2016)The effects of tensile strain rate on the hydrogen-induced mechanical and microstructural features of a twinning-induced plasticity (TWIP) steel were investigated using a Fe-23Mn-0.5C steel with a saturated amount of ... -
The Effect of Strain Rate on the Hydrogen Embrittlement Susceptibility of Aluminum 7075
(ASME, 2023)The effects of changing the strain rate regime from quasi-static to medium on hydrogen susceptibility of aluminum (Al) 7075 were investigated using tensile tests. Strain rates were selected as 1 s(-1) and 10(-3) s(-1) and ... -
The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites
(SPRINGER INDIA, 7TH FLOOR, VIJAYA BUILDING, 17, BARAKHAMBA ROAD, NEW DELHI, 110 001, INDIA, 2020)The aim of this study is to produce composite materials by recycling metallic chips, which are found in industry as a large amount of waste. In addition, it is aimed to investigate the effect of ultrasonic cleaning process ... -
Effects of total cost of ownership on automobile purchasing decisions
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2020)In this paper, we reveal a complete picture of ownership-related expenses and construct a decision model which helps decision maker to make the best choice when purchasing an automobile. The decision model helps the customers ... -
Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel
(ASMETWO PARK AVE, NEW YORK, NY 10016-5990, 2021)In this study, chromium electroplating process, corresponding hydrogen embrittlement, and the effects of baking on hydrogen diffusion are investigated. Three types of materials in the form of Raw 4340 steel, Chromium ...