Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorHussaini S.
dc.contributor.authorKursunoglu, Sait
dc.contributor.authorKaya, Muammer
dc.date.accessioned2024-06-03T14:55:54Z
dc.date.available2024-06-03T14:55:54Z
dc.date.issued2019en_US
dc.identifier.isbn978-605011273-3
dc.identifier.urihttps://hdl.handle.net/20.500.12573/2171
dc.description.abstractThe laboratory scale leaching of Kayseri-Yahyali non-sulphide lead (Pb)-zinc (Zn) flotation tailing using two organic acids was experimentally investigated. The effect of citric and oxalic acid on the dissolution of Zn, Pb, iron (Fe) and arsenic (As) was individually investigated under the following conditions: citric or oxalic acid concentration of 0.5-1.0M, temperature of 60-80°C and leaching time of 30-180 min. at 1/10 solid-to-liquid (S/L) ratio. 90.1% Zn dissolution was achieved using 0.5 M citric acid at 80°C leaching temperature for 180 min leaching time. The Fe, Pb and As dissolutions were determined as less than 20% under the conditions tested. 95.5% Fe and 68.8% As were removed from the flotation tailing along with less than 5% of Zn and Pb using 1.0 M oxalic acid for 180 min. leaching time at 60°C leaching temperature. It was found that citric acid is more prominent than oxalic acid for the selective leaching of zinc from the flotation tailing whereas a substantial amount of iron and arsenic removal can be achived by oxalic acid leaching. The use of NaCl along with citric acid was not useful for higher Zn dissolution. Based on the experimental results, an appropriate process will be improved for the selective leaching of valuable metals from the Pb-Zn non-sulphide flotation tailing in the near future. Copyrighten_US
dc.language.isoengen_US
dc.publisherBaskien_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCitric aciden_US
dc.subjectFlotation tailingen_US
dc.subjectNon-sulphide lead-zincen_US
dc.subjectOxalic acid; Zinc dissolutionen_US
dc.titleLeaching of yahyali non-sulphide PB-ZN flotation tailing using organic acidsen_US
dc.typeconferenceObjecten_US
dc.contributor.departmentAGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümüen_US
dc.contributor.authorID0000-0002-1680-5482en_US
dc.contributor.institutionauthorKursunoglu, Sait
dc.identifier.startpage897en_US
dc.identifier.endpage908en_US
dc.relation.journalIMCET 2019 - Proceedings of the 26th International Mining Congress and Exhibition of Turkeyen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster