Ara
Toplam kayıt 11, listelenen: 1-10
Makerspace: Innovation in Mechanical Engineering Education
(2021)
The complexity of industrial developments requires engineering students to have hands on experience as well as theoretical engineering knowledge. There is a need for a change of classical engineering curriculums. Makerspaces ...
Low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)
This study investigates the low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints and the effects of both strength and plastic deformation capability of adherend material on adhesive failure. ...
Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)
Additive manufacturing provides the production of many machine parts and components with complex geometries. The adhesive bonding technique can be alternative method for joining parts produced with additive manufacturing. ...
Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)
The effects of strain rate, size (height x width), and pre-existing crack length on the mechanical response of polycaprolactone electrospun membranes were investigated by tension tests conducted at room temperature. In ...
An experimental and numerical study of the exchange current density in an HTPEM fuel cell
(WILEY-V C H VERLAG GMBHPOSTFACH 101161, 69451 WEINHEIM, GERMANY, 2021)
The purpose of this study is to examine the effects of exchange current density, as dependent on operating parameters, on the activation polarization in an HTPEM fuel cell. In line with this purpose, cell performance tests ...
Towards Analysis and Optimization for Contact Zone Temperature Changes and Specific Wear Rate of Metal Matrix Composite Materials Produced from Recycled Waste
(MDPIST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021)
Tribological properties are important to evaluate the in-service conditions of machine elements, especially those which work as tandem parts. Considering their wide range of application areas, metal matrix composites (MMCs) ...
Optimization Study on Surface Roughness and Tribological Behavior of Recycled Cast Iron Reinforced Bronze MMCs Produced by Hot Pressing
(MDPIST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021)
Surface roughness reflects the quality of many operational parameters, namely service life, wear characteristics, working performance and tribological behavior of the produced part. Therefore, tribological performance is ...
The role of hydrogen in the edge dislocation mobility and grain boundary-dislocation interaction in alpha-Fe
(PERGAMON-ELSEVIER SCIENCE LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2021)
The atomistic mechanisms of dislocation mobility depending on the presence of hydrogen were investigated for two edge dislocation systems that are active in the plasticity of alpha-Fe, specifically 1/2<111>{110} and ...
Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)
This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an ...
Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)
The aim of this research was to investigate the effect of pre-rolling temperature on the interfacial properties in delamination modes 1 and 2; and formability in Single Point Incremental Forming (SPIF) of Steel-Steel (St-St) ...