Başlık için Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 104, listelenen: 62-81
-
Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2019)We investigated the strain rate dependency of the hydrogen-induced mechanical degradation of Fe-33Mn-1.1C steel at 303K within the strain rate range of 10(-2) to 10(-5)s(-1). In the presence of hydrogen, lowering the strain ... -
Magnus series expansion method for solving nonhomogeneous stiff systems of ordinary differential equations
(ACADEMIC PUBLICATION COUNCILPO BOX 17225, KHALDIYA 72453, KUWAIT, 2016)In this paper, Magnus Series Expansion Method, which is based on Lie Groups and Lie algebras is proposed with different orders to solve nonhomogeneous stiff systems of ordinary differential equations. Using multivariate ... -
Makerspace: Innovation in Mechanical Engineering Education
(2021)The complexity of industrial developments requires engineering students to have hands on experience as well as theoretical engineering knowledge. There is a need for a change of classical engineering curriculums. Makerspaces ... -
Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)The delamination and degradation of solid oxide fuel cells (SOFCs) electrode/electrolyte interface is estimated by calculating the stresses generated within the different layers of the cell. The stresses developed in a ... -
Micro-/Nanostructured Highly Crystalline Organic Semiconductor Films for Surface-Enhanced Raman Spectroscopy Applications
(WILEY-V C H VERLAG GMBH, 2015)The utilization of inorganic semiconductors for surface-enhanced Raman spectroscopy (SERS) has attracted enormous interest. However, despite the technological relevance of organic semiconductors for enabling inexpensive, ... -
Microstructural, mechanical, tribological, and corrosion behavior of ultrafine bio-degradable Mg/CeO2 nanocomposites: Machine learning-based modeling and experiment
(ELSEVIER SCI LTD, 2023)The present study investigated the microstructural, mechanical, tribological, and corrosion behavior of near-dense and low-volume fraction magnesium-cerium dioxide (Mg/CeO2 ) (x = 0.5, 1, and 1.5 vol.%) nanocomposites ... -
Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti-6Al-4V substrates
(ELSEVIER SCI LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2019)We report on the microstructure and tribological behavior of equimolar TiTaHfNbZr high entropy alloy (HEA) thin films deposited on the biomedical Ti-6Al-4V substrates by RF magnetron sputtering. Results of nanoindentation ... -
Model Updating of a Euler-Bernoulli Beam Using the Response Method
(Kocaeli Üniversitesi, 2021)In this study, the computational model is updated using an analytical model instead of an experimental one. Continuous and discrete parameter models of a Euler–Bernoulli beam are constructed analytically and computationally. ... -
Modulating the Surface Properties of Metallic Implants and the Response of Breast Cancer Cells by Surface Relief Induced via Bulk Plastic Deformation
(FRONTIERS MEDIA SA, AVENUE DU TRIBUNAL FEDERAL 34, LAUSANNE, CH-1015, SWITZERLAND, 2020)Micro/nanoscale textured surfaces have presented promising tissue-implant integration via increasing surface roughness, energy, and wettability. Recent studies indicate that surface texture imparted on the metallic implants ... -
Monitoring and verification of micro-strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory
(WILEY, 2023)Fiber Bragg Grating (FBG) sensors possess enormous potential for the cure monitoring and integrity assessment of Carbon Fiber Reinforced Polymer (CFRP) composites. These sensors can be embedded inside the structure to ... -
Nuclear energy consumption, energy access and energy poverty: Policy implications for the COP27 and environmental sustainability
(ELSEVIER SCI LTD, 2023)The ever-increasing energy resource demand and subsequent environmental challenges mean that policymakers have shifted their focus to nuclear energy to address energy and environmental issues due to its unlimited potential. ... -
Numerical Investigation of the Role of Volumetric Transformation Strain on the Relaxation Stress and the Corresponding Hydrogen Interstitial Concentration in Niobium Matrix
(HINDAWI LTD, ADAM HOUSE, 3RD FLR, 1 FITZROY SQ, LONDON, W1T 5HF, ENGLAND, 2017)The effects of relaxation stress on the hydrogen concentration in Niobium-(Nb-) H media were investigated by iterative numerical modeling approach. To calculate the transformation strain, relaxation stress, and corresponding ... -
The Numerical Solutions for Stiff Ordinary Differential Equations by Using Interpolated Variational Iteration Method with Comparison to Exact Solutions
(AMER INST PHYSICS, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, 2018)Recently proposed Interpolated Variational Iteration Method (IVIM) is used to find numerical solutions of stiff ordinary differential equations for both linear and nonlinear problems. The examples are given to illustrate ... -
Off-the-Shelf Electronics in Rescue Robotics
(ASSOC COMPUTING MACHINERY, 2015)The design and manufacturing methods of rescue robots with different locomotion principles are explained in the literature in detail. However, the design and realization of electronic circuits of a rescue robot still pose ... -
On Critical Buckling Loads of Columns under End Load Dependent on Direction
(Hindawi Publishing Corporation, 2014)Most of the phenomena of various fields of applied sciences are nonlinear problems. Recently, various types of analytical approximate solution techniques were introduced and successfully applied to the nonlinear differential ... -
On Critical Buckling Loads of Euler Columns With Elastic End Restraints
(HİTİT ÜNİVERSİTESİ, 2016)I n recent years, a great number of analytical approximate solution techniques have been introduced to find a solution to the nonlinear problems that arised in applied sciences. One of these methods is the homotopy analysis ... -
On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn-0.5C TWIP Steel in the Presence of Hydrogen
(ASME, TWO PARK AVE, NEW YORK, NY 10016-5990 USA, 2018)This paper presents a combined experimental and theoretical analysis focusing on the individual roles of microdeformation mechanisms that are simultaneously active during the deformation of twinning-induced plasticity ... -
Optimization Study on Surface Roughness and Tribological Behavior of Recycled Cast Iron Reinforced Bronze MMCs Produced by Hot Pressing
(MDPIST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021)Surface roughness reflects the quality of many operational parameters, namely service life, wear characteristics, working performance and tribological behavior of the produced part. Therefore, tribological performance is ... -
Oscillation characteristics of mutually impinging dual jets in a mixing chamber
(AMER INST PHYSICS, 1305 WALT WHITMAN RD, STE 300, MELVILLE, NY 11747-4501 USA, 2018)In this study, we consider the oscillatory behavior of mutually impinging jets in an enclosed, domeshaped mixing chamber. The frequency of the impinging jet oscillations is dictated by the flow rate, with the oscillatory ... -
A parametric study for drilling high quality holes on glass fiber composites
(YILDIZ TEKNİK ÜNİVERSİTESİ, 2022)The objective of this study is to investigate the effect of cutting parameters on the qual- ity of holes drilled in a glass fiber reinforced thermoset polymer with the delamination factor defined as the ratio of intended ...